Command Line Interface
9091553-KDU 137 365 Uen D 2006-06-16
Command Mode
Privileged Exec
Example
Priority Commands (Layer 3 and 4)
This section describes commands used to configure Layer 3 and 4 priority
mapping on the ECN330.
Table 102 Priority Commands (Layer 3 and 4)
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
CoS Value : 0 1 2 3 4 5 6 7
Priority Queue: 2 0 1 3 4 5 6 7
Console#
Command Function Mode Page
map ip port Enables TCP or UDP class of service mapping GC 910
map ip port Maps TCP or UDP socket to a class of service IC 911
map ip
precedence
Enables IP precedence class of service mapping GC 912
map ip
precedence
Maps IP precedence value to a class of service IC 913
map ip dscp Enables IP DSCP class of service mapping GC 914
map ip dscp Maps IP DSCP value to a class of service IC 915
show map ip port Shows the IP port map PE 916
show map ip
precedence
Shows the IP precedence map PE 917
show map ip dscp Shows the IP DSCP map PE 919
To Next Page
Loading...
