Command Line Interface
910 1553-KDU 137 365 Uen D 2006-06-16
7.19.10 map ip port (Global Configuration)
This command enables IP port mapping (that is, class of service mapping for
TCP or UDP sockets). Use the no form to disable IP port mapping.
Syntax
[no] map ip port
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
The precedence for priority mapping is IP Port, IP Precedence or IP DSCP,
and default switchport priority.
Example
The following example shows how to enable TCP or UDP port mapping globally:
Console(config)#map ip port
Console(config)#
To Next Page
Loading...
