Command Line Interface
932 1553-KDU 137 365 Uen D 2006-06-16
Command Usage
• Only one policy map can be assigned to an interface.
• First define a class map, set an ACL mask to match the criteria
defined in the class map, then define a policy map, and finally use
the service-policy command to bind the policy map to the
required interface.
Example
This example applies a service policy to an ingress interface.
7.20.8 show class-map
This command displays the QoS class maps which define matching criteria used
for classifying traffic.
Syntax
show class-map [<class-map-name>]
class-map-name - Name of the class map. (Range: 1-16 characters)
Default Setting
Displays all class maps.
Command Mode
Privileged Exec
Console(config)#interface ethernet 1/1
Console(config-if)#service-policy input rd_policy
Console(config-if)#
To Next Page
Loading...
