Command Line Interface
986 1553-KDU 137 365 Uen D 2006-06-16
7.23.10 domain-name
This command specifies the domain name for a DHCP client. Use the no form
to remove the domain name.
Syntax
domain-name <domain>
no domain-name
domain - Specifies the domain name of the client.
(Range: 1-32 characters)
Default Setting
None
Command Mode
DHCP Pool Configuration
Example
7.23.11 dns-server
This command specifies the Domain Name System (DNS) IP servers available
to a DHCP client. Use the no form to remove the DNS server list.
Syntax
dns-server <address1> [address2]
no dns-server
• address1 - Specifies the IP address of the primary DNS server.
• address2 - Specifies the IP address of the alternate DNS server.
Console(config-dhcp)#domain-name sample.com
Console(config-dhcp)#
To Next Page
Loading...
