Ericsson ECN330 - Page 996

Command Line Interface
990 1553-KDU 137 365 Uen D 2006-06-16
Related Commands
netbios-node-type (section 7.23.15 on page 990)
7.23.15 netbios-node-type
This command configures the NetBIOS node type for Microsoft DHCP clients.
Use the no form to remove the NetBIOS node type.
Syntax
netbios-node-type <type>
no netbios-node-type
type - Specifies the NetBIOS node type:
• broadcast
• hybrid (recommended)
• mixed
• peer-to-peer
Default Setting
None
Command Mode
DHCP Pool Configuration
Example
Related Commands
netbios-name-server (section 7.23.14 on page 989)
Console(config-dhcp)#netbios-node-type hybrid
Console(config-dhcp)#