Command Line Interface
9891553-KDU 137 365 Uen D 2006-06-16
Related Commands
next-server (section 7.23.12 on page 987)
7.23.14 netbios-name-server
This command configures NetBIOS Windows Internet Naming Service (WINS)
name servers that are available to Microsoft DHCP clients. Use the no form to
remove the NetBIOS name server list.
Syntax
netbios-name-server <address1> [address2]
no netbios-name-server
• address1 - Specifies IP address of primary NetBIOS WINS name
server.
• address2 - Specifies IP address of alternate NetBIOS WINS name
server.
Default Setting
None
Command Mode
DHCP Pool Configuration
Command Usage
Servers are listed in order of preference (starting with address1 as the
most preferred server).
Example
Console(config-dhcp)#netbios-name-server 10.1.0.33 10.1.0.34
Console(config-dhcp)#
To Next Page
Loading...
