Command Line Interface
988 1553-KDU 137 365 Uen D 2006-06-16
Example
Related Commands
bootfile (section 7.23.13 on page 988)
7.23.13 bootfile
This command specifies the name of the default boot image for a DHCP client.
This file should placed on the Trivial File Transfer Protocol (TFTP) server
specified with the next-server command. Use the no form to delete the boot
image name.
Syntax
bootfile <filename>
no bootfile
filename - Name of the file that is used as a default boot image.
Default Setting
None
Command Mode
DHCP Pool Configuration
Example
Console(config-dhcp)#next-server 10.1.0.21
Console(config-dhcp)#
Console(config-dhcp)#bootfile wme.bat
Console(config-dhcp)#
To Next Page
Loading...
