176
Down Mix Assign
Parameter Default Setting range Description
Left
Right
Center
Left Surround
Right Surround
Left: Source CH1
Right: Source CH2
Center: Source CH3
Left Surround: Source CH5
Right Surround: Source CH6
Source CH
1-16
Selects audio signals that are
selected for SOURCE channels
1 through 16 in the Source
Select menu (9-3-4) for the
channels to be downmixed.
Which input audio signal is
used for the SOURCE channel
is displayed as (SDI CH1).
* If the same SOURCE channel is selected for multiple channels among the above, or
NON-PCM signal is assigned to a Source channel, Down MIX-L and Down MIX-R will be
muted.
* The downmixed audio signals are output as Down Mix-L, and R.
NOTE
To embed downmixed audio signals, Down Mix -L and R, see section 9-3-11 "SDI
Audio Output Setting”. To output downmixed audio signal from AES connectors, see
section 9-3-12 “AES Audio Output Setting”. To output from the analog audio output
connectors, see section 9-3-13 “Analog Audio Output Setting”.
To change the Source signal assignments, see section 9-3-4 “Source Select”.
To Next Page
Loading...
