Juniper MX480 - Page 165

Table 73: Cable and Wire Specifications for Routing Engine and RCB
Management and Alarm Interfaces (continued)
Router
Receptacle
Maximum
Length
Cable/Wire
Supplied
Cable
SpecificationPort
RJ-45
autosensing
100 mOne 4.57-m
length with
RJ-45/RJ-45
connectors
Category 5 cable
or equivalent
suitable for
100Base-T
operation
Routing Engine
Ethernet
interface
—NoneNoWire with gauge
between
28-AWG and
14-AWG (0.08
and 2.08 mm
2
)
Alarm relay
contacts
Related
Documentation
• Understanding Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion on page 133
• Calculating Power Budget and Power Margin for Fiber-Optic Cables on page 131
135Copyright © 2017, Juniper Networks, Inc.
Chapter 10: Transceiver and Cable Specifications