CHAPTER 16
Installing the MX480 Router
•
Installing an MX480 Router Overview on page 187
•
Tools Required to Install the MX480 Router with a Mechanical Lift on page 188
•
Removing Components from the MX480 RouterBefore Installing It with a Lift on page189
•
Installing the MX480 Router Using a Mechanical Lift on page 194
•
Reinstalling Components in the MX480 Router After Installing It with a Lift on page 196
•
Tools Required to Install the MX480 Router Without a Mechanical Lift on page 201
•
Removing Components from the MX480 Router Before Installing It Without a
Lift on page 202
•
Installing the MX480 Chassis in the Rack Manually on page 208
•
Reinstalling Components in the MX480 Router After Installing It Without a
Lift on page 210
•
Installing the MX480 Router Cable Management Bracket on page 215
Installing an MX480 Router Overview
To install the router:
1. Prepare the installation site.
See “MX480 Site Preparation Checklist” on page 121.
2. Review the safety guidelines and warnings.
•
General Safety Guidelines for Juniper Networks Devices
•
General Safety Warnings for Juniper Networks Devices
3. Unpack the router and verify that all parts have been received.
a. See “Unpacking the MX480 Router” on page 177.
b. See “Verifying the MX480 Router Parts Received” on page 179.
4. Install the mounting hardware.
187Copyright © 2017, Juniper Networks, Inc.
To Next Page
Loading...
