Juniper MX480 - Maintaining Components; Tools and Parts Required to Maintain the MX480 Router; Maintaining the MX480 Air Filter

CHAPTER 29
Maintaining Components
•
Tools and Parts Required to Maintain the MX480 Router on page 415
•
Maintaining the MX480 Air Filter on page 415
•
Maintaining the MX480 Fan Tray on page 416
•
Maintaining the MX480 Host Subsystem on page 418
•
Maintaining MX480 DPCs on page 420
•
Holding an MX480 DPC on page 422
•
Storing an MX480 DPC on page 424
•
Maintaining MX480 FPCs on page 425
•
Holding an MX480 FPC on page 427
•
Storing an MX480 FPC on page 429
•
Maintaining MX480 MICs on page 430
•
Maintaining MX480 MPCs on page 431
•
Maintaining MX480 PICs on page 433
•
Maintaining Cables That Connect to MX480 DPCs, MPCs, MICs, or PICs on page 434
•
Maintaining the MX480 Power Supplies on page 435
Tools and Parts Required to Maintain the MX480 Router
To maintain hardware components, you need the following tools and parts:
•
ESD grounding wrist strap
•
Flat-blade (–) screwdriver
•
Phillips (+) screwdriver, number 1
•
Phillips (+) screwdriver, number 2
Related
Documentation
Routine Maintenance Procedures for the MX480 Router on page 413•
Maintaining the MX480 Air Filter
Purpose For optimum cooling, verify the condition of the air filters.
415Copyright © 2017, Juniper Networks, Inc.