Juniper MX480 - Troubleshooting the MX480 Mics

Total CPU DRAM 1024 MB
Total RLDRAM 128 MB
Total DDR DRAM 2048 MB
Start time: 2008-12-11 16:53:24 PST
Uptime: 15 hours, 2 minutes, 47 seconds
For further description of the output from the commands, see the Junos OS
Administration Library.
Related
Documentation
MX480 Flexible PIC Concentrator (FPC) LEDs on page 65•
• Replacing an MX480 FPC on page 332
• Holding an MX480 FPC on page 427
• Storing an MX480 FPC on page 429
• Maintaining MX480 FPCs on page 425
Troubleshooting the MX480 MICs
Problem Description: The MICs are not functioning normally.
Solution Check the status of each port on a MIC by looking at the LED located on the MIC
faceplate. For information about the meaning of LED states on different MICs, see the
MX Series Interface Module Reference.
•
• Check the status of a MIC by issuing the show chassis fpc pic-status CLI command. The
MIC slots in the MPC are labeled PIC 0/1 and PIC 2/3, left to right:
user@host> show chassis fpc pic-status
Slot 0 Online DPCE 4x 10GE R EQ
PIC 0 Online 1x 10GE(LAN/WAN) EQ
PIC 1 Online 1x 10GE(LAN/WAN) EQ
PIC 2 Online 1x 10GE(LAN/WAN) EQ
PIC 3 Online 1x 10GE(LAN/WAN) EQ
Slot 1 Online DPCE 40x 1GE R EQ
PIC 0 Online 10x 1GE(LAN) EQ
PIC 1 Online 10x 1GE(LAN) EQ
PIC 2 Online 10x 1GE(LAN) EQ
PIC 3 Online 10x 1GE(LAN) EQ
Slot 2 Online MS-DPC
PIC 0 Online MS-DPC PIC
PIC 1 Online MS-DPC PIC
Slot 3 Online MPC Type 2 3D EQ
PIC 0 Online 1x 10GE XFP
PIC 1 Online 1x 10GE XFP
Slot 4 Online MPC 3D 16x 10GE
PIC 0 Online 4x 10GE(LAN) SFP+
PIC 1 Online 4x 10GE(LAN) SFP+
PIC 2 Online 4x 10GE(LAN) SFP+
PIC 3 Online 4x 10GE(LAN) SFP+
For further description of the output from the command, see the CLI Explorer.
Copyright © 2017, Juniper Networks, Inc.446
MX480 3D Universal Edge Router Hardware Guide