•
Press the AS MSC offline/online button until the LED light turns green.
•
Issue the following CLI command:
user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot online
For more information about the command, see the CLI Explorer.
The normal functioning status LED confirms that the AS MSC is online. You can also
verify correct AS MSC functioning by issuing the show chassis fpc pic-status.
Figure 156: Installing an AS MSC
See Also MX480 Application Services Modular Storage Card Description on page 96•
• Removing an MX480 AS MSC on page 360
• Preventing Electrostatic Discharge Damage to an MX480 Router on page 484
Related
Documentation
Preventing Electrostatic Discharge Damage to an MX480 Router on page 484•
• Replacing an MX480 AS MLC on page 355
• MX480 Application Services Modular Storage Card Description on page 96
Copyright © 2017, Juniper Networks, Inc.362
MX480 3D Universal Edge Router Hardware Guide
To Next Page
Loading...
