CHAPTER 28
Routine Maintenance Procedures
•
Routine Maintenance Procedures for the MX480 Router on page 413
Routine Maintenance Procedures for the MX480 Router
Purpose For optimum router performance, perform preventive maintenance procedures.
Action Inspect the installation site for moisture, loose wires or cables, and excessive dust.
Make sure that airflow is unobstructed around the router and into the air intake vents.
•
• Check the status-reporting devices on the craft interface—System alarms and LEDs.
• Inspect the air filter at the left rear of the router, replacing it every 6 months for optimum
coolingsystem performance. Do not run the routerfor more than a few minuteswithout
the air filter in place.
Related
Documentation
• Maintaining the MX480 Air Filter on page 415
413Copyright © 2017, Juniper Networks, Inc.
To Next Page
Loading...
