PIC 3 Online 1x 10GE(LAN/WAN) EQ
Slot 1 Online DPCE 40x 1GE R EQ
PIC 0 Online 10x 1GE(LAN) EQ
PIC 1 Online 10x 1GE(LAN) EQ
PIC 2 Online 10x 1GE(LAN) EQ
PIC 3 Online 10x 1GE(LAN) EQ
Slot 2 Online MS-DPC
PIC 0 Online MS-DPC PIC
PIC 1 Online MS-DPC PIC
Slot 3 Online MPC Type 2 3D EQ
PIC 0 Online 1x 10GE XFP
PIC 1 Online 1x 10GE XFP
Slot 4 Online MPC 3D 16x 10GE
PIC 0 Online 4x 10GE(LAN) SFP+
PIC 1 Online 4x 10GE(LAN) SFP+
PIC 2 Online 4x 10GE(LAN) SFP+
PIC 3 Online 4x 10GE(LAN) SFP+
For further description of the output from the command, see the CLI Explorer.
Related
Documentation
MX480 Modular Port Concentrator (MPC) Description on page 87•
• MX480 Modular Port Concentrator (MPC) LEDs on page 90
• Troubleshooting the MX480 MPCs on page 447
• Replacing an MX480 MPC on page 345
Maintaining MX480 PICs
Purpose For optimum router performance, verify the condition of the PICs.
Action On a regular basis:
• Check the LEDs on PIC faceplates. The meaning of the LED states differs for various
PICs. For more information, see the MX Series Interface Module Reference. If the FPC that
houses the PIC detects a PIC failure, the FPC generates an alarm message to be sent
to the Routing Engine.
• Issue the CLI show chassis fpc pic-status command. The PIC slots in an FPC are
numbered from 0 through 1, left to right:
user@host> show chassis fpc pic-status
Slot 0 Online DPC 40x 1GE R
PIC 0 Online 10x 1GE(LAN)
PIC 1 Online 10x 1GE(LAN)
PIC 2 Online 10x 1GE(LAN)
PIC 3 Online 10x 1GE(LAN)
Slot 1 Online MX FPC Type 3
PIC 0 Online 1x OC-192 SONET
PIC 1 Online 1x OC-192 SONET
Slot 2 Online MS-DPC
PIC 0 Online MS-DPC PIC
PIC 1 Online MS-DPC PIC
Slot 3 Online MPC Type 2 3D EQ
433Copyright © 2017, Juniper Networks, Inc.
Chapter 29: Maintaining Components
To Next Page
Loading...
Need help?
General
