The normal functioning status LED confirms that the PIC is online. You can also verify
correct PIC functioning by issuing the show chassis fpc pic-status command described
in “Maintaining MX480 PICs” on page 433.
Figure 103: Installing a PIC
Related
Documentation
Preventing Electrostatic Discharge Damage to an MX480 Router on page 484•
• Removing an MX480 PIC on page 351
• Troubleshooting the MX480 PICs on page 449
• Maintaining MX480 PICs on page 433
• MX480 PIC Serial Number Label on page 468
• MX480 PIC Description on page 66
• Replacing an MX480 FPC on page 332
273Copyright © 2017, Juniper Networks, Inc.
Chapter 21: Installing Components
To Next Page
