Juniper MX480 - AC Power Requirements, Specifications, and Guidelines; AC Electrical Specifications for the MX480 Router; Table 76: AC Power Supply Electrical Specifications

CHAPTER 12
AC Power Requirements, Specifications,
and Guidelines
•
AC Electrical Specifications for the MX480 Router on page 139
•
Power Requirements for an MX480 Router on page 140
•
Calculating Power Requirements for MX480 Routers on page 149
•
AC Power Circuit Breaker Requirements for the MX480 Router on page 153
•
AC Power Cord Specifications for the MX480 Router on page 153
AC Electrical Specifications for the MX480 Router
Table 76 on page 139 lists the AC power supply electrical specifications;
Table 77 on page 140 lists the AC power system specifications.
Table 76: AC Power Supply Electrical Specifications
SpecificationItem
Normal-Capacity Power Supplies
1027 W (low line)
1590 W (high line)
Maximum output power
Operating range: 100 – 240 VAC (nominal)AC input voltage
50 to 60 Hz (nominal)AC input line frequency
11.0 A @ 200 VAC or 14.5 A @ 110 VAC maximumAC input current rating
85% (low line and high line)Efficiency
NOTE: This value is at full
load and nominal voltage.
High-Capacity Power Supplies
1167 W (low line)
2050 W (high line)
Maximum output power
139Copyright © 2017, Juniper Networks, Inc.