Juniper MX480 - Table 86: AC Power Cord Specifications

You can order detachable AC power cords, each approximately 8 ft (2.5 m) long that
supply AC power to the router. The C19 appliance coupler at the female end of the cord
inserts into the AC appliance inlet coupler, type C20 (right angle) as described by
International Electrotechnical Commission (IEC) standard 60320. The plug at the male
end of the power cord fits into the power source receptacle that is standard for your
geographical location.
Table 86 on page 154 provides specifications and Figure 46 on page 155 depicts the plug
on the AC power cord provided for each country or region.
Table 86: AC Power Cord Specifications
Plug Type
Electrical
SpecificationModel NumberCountry
SAA/3/15240 VAC, 50 Hz ACCBL-M-PWR-RA-AUAustralia
CH2-16P220 VAC, 50 Hz ACCBL-M-PWR-RA-CHChina
CEE 7/7220 or 230 VAC, 50 Hz
AC
CBL-M-PWR-RA-EUEurope (except Denmark, Italy, Switzerland,
and United Kingdom)
CEI 23-16/VII230 VAC, 50 Hz ACCBL-M-PWR-RA-ITItaly
JIS 8303125 VAC, 50 or 60 Hz
AC
CBL-PWR-RA-JP15Japan
NEMA L6-20P220 VAC, 50 or 60 Hz
AC
CBL-M-PWR-RA-JP
NEMA 5-15P125 VAC, 60 Hz ACCBL-PWR-RA-US15North America
NEMA L5-15P125 VAC, 60 Hz ACCBL-PWR-RA-TWLK-US15
NEMA 6-20250 VAC, 60 Hz ACCBL-M-PWR-RA-US
NEMA L6-20P250 VAC, 60 Hz ACCBL-M-PWR-RA-TWLK-US
BS89/13240 VAC, 50 Hz ACCBL-M-PWR-RA-UKUnited Kingdom
Copyright © 2017, Juniper Networks, Inc.154
MX480 3D Universal Edge Router Hardware Guide