2-4 Service Manual
4023-001
943 Controller
Font Version
Indicates that the RIP controller code and FONT ROM
are incompatible.
944 Controller
Board Failure
Replace the RIP controller board.
945 Controller
Board Failure -
ASIC Failure
Replace the RIP controller board.
946 Controller
Board Failure -
SRAM Failure
Replace the RIP controller board.
947 Engine
Board
Replace the printer main engine board (PWB-A).
953 NVRAM
Failure
Indicates the NVRAM chip on the engine board has
failed. Replace the IC EPROM on printer main engine
board (PWB-A).
954 NVRAM
Failure
Indicates the NVRAM experienced a CRC failure.
Replace the printer main engine board (PWB-A).
955, 956, 957,
959 System
Board
Indicates a processor, ASIC or SRAM failure on the
engine board. Replace the printer main engine board
(PWB-A).
960 RAM
Memory Error
Indicates a memory error on the RIP controller board.
Replace the RIP controller board.
961 RAM in Slot
1(J4) is Bad.
Ensure RAM is properly installed. Replace RAM in Slot
1. If this does not fix the problem, replace the RIP
controller board.
962 RAM in Slot
2 (J3) is Bad.
Ensure RAM is properly installed. Replace RAM in Slot
2. If this does not fix the problem, replace the RIP
controller board.
963 RAM in Slot
3 (J1) is Bad.
Ensure RAM is properly installed. Replace RAM in Slot
3. If this does not fix the problem, replace the RIP
controller board.
Error Code Action
To Next Page
Loading...
