2-6 Service Manual
4023-001
994 LCC Tray 4
(2500-sheet)
Indicates lifter 1 limit error.
1. Ensure connectors are plugged in.
2. Check lift sensor 1 (LS1). Replace if defective.
3. Replace LCC main board (PWB-A).
995 LCC Tray Indicates lifter 2 limit error.
1. Ensure connectors are plugged in.
2. Check lift sensor 2 (LS2). Replace if defective.
3. Replace LCC main board (PWB-A).
993 Finisher Indicates elevator tray driver error.
Go to
“Finisher Elevator Tray Service Check (993)”
on page 2-53.
994 Finisher Indicates finishing tray driver error.
Go to
“Finisher Tray Drive Service Check (994)” on
page 2-54.
995 Finisher Indicates shift plate drive error.
Go to
“Finisher Shift Plate Drive Service Check
(995)” on page 2-54
.
996 Finisher Indicates arrangement bar drive error.
Go to
“Finisher Paper Aligning Service Check
(996)” on page 2-54
.
997 Finisher Indicates stapler driver error.
Go to
“Finisher Stapler Drive Service Check (997)”
on page 2-56
.
998 Finisher Indicates supporting tray driver error.
Go to
“Finisher Paper Holding Tray Drive Service
Check (998)” on page 2-56
.
Error Code Action
To Next Page
Loading...
