2-18 Service Manual
4023-001
54 Par x ENA
Connection Lost
An external network
adapter (ENA) that was
once connected to the
specified parallel port is
no longer responding.
The printer only
recognizes the missing
connection when the
printer power is first
turned on.
• Ensure the cable con-
necting the ENA and the
printer is securely
attached. Turn the
printer off and then on
again to see if the printer
recognizes the connec-
tion.
•Press
Go to clear the
message. The printer
erases any reference to
the ENA and then
resets.
54 Ser x Fax
Connection Lost
See operator manual.
54 Network x
Software Error
See operator manual.
55 Insufficient Fax
Buffer
See operator manual.
56 Serial Port x
Disabled
Data is sent to the
printer across the serial
port, but the serial port is
disabled. When the
serial error is displayed,
the reporting of other
serial errors is sup-
pressed until the menus
are entered or the
printer is reset.
x is 1, 2, or 3 and repre-
sents the serial option
attached.
Press Go to clear the
message. The printer
discards any data received
on the serial port.
Enable the serial port.
Or,
Reset the printer:
•Press <Menu> to
access the Busy menu.
•Select Reset Printer.
Message Description Action
To Next Page
Loading...
