Lexmark Optra W810 - Page 127

Diagnostic Information 2-19
4023-001
56 Std Parallel Port
Disabled
Data is sent to the
printer across the paral-
lel port, but the parallel
port is disabled. When
the error is displayed,
the reporting of other
errors is suppressed
until the menus are
entered or the printer is
reset.
•Press
Go to clear the
message. The printer
discards the data sent to
the parallel port.
• Reset the printer. Press
Menu> or <Menu. The
Job Menu is displayed.
Press
Menu> or <Menu
until Reset Printer
appears on the second
line. Press
Select.
56 Parallel Port x
Disabled
Data was sent to the
specified parallel port,
but the port has been
disabled from the
Parallel Buffer menu
item.
•Press
Go to clear the
message. The printer
discards the data sent to
the parallel port.
• Reset the printer. Press
Menu> or <Menu. The
Job Menu is displayed.
Press
Menu> or <Menu
until Reset Printer
appears on the second
line. Press
Select.
58 Too Many Disks
Installed
You have installed more
than one Hard Disk
Option. The Hard Disk
Option can be installed
only in connector 3.
Turn off the printer and
remove the extra Hard Disk
Option.
58 Too Many Flash
Options
See operator manual.
61 Defective Disk The printer detects a
defective disk during
power on, or during disk
format and write opera-
tions.
Press Go to clear the
message. Hard disk
operations are not allowed
with a defective hard disk.
Remove the defective hard
disk and replace it with a
new hard disk.
Message Description Action