2-20 Service Manual
4023-001
62 Disk Full There is not enough free
space in the disk to hold
the data that was sent.
Press Go to clear the
message and continue
processing. Any data
currently being written to
the disk is lost.
Reset the printer:
•Press <Menu> to
access the Busy menu.
•Select Reset Printer.
63 Unformatted
Disk
The printer detected an
unformatted hard disk
when the printer was
turned on. Disk opera-
tions are not allowed
until the disk is format-
ted.
• Format the hard disk
with the Format Disk
setting in the Tests
Menu.
• Send the data again.
• If the error condition
remains, the disk is
defective and must be
replaced.
Press Go to clear the
message. The disk is
ignored and normal
operation continues.
70-79 INA errors These numbered mes-
sages are reserved for
internal network adapter
messages.
See the CD-rom on-line
Help for more information.
Also, refer to the documen-
tation that is included with
the internal network
adapter.
Message Description Action
To Next Page
Loading...
