Omron RX2 Series - Page 821

A - 13
Appendices A Technical Information
High-function General-purpose Inverter RX2 Series User’s Manual
A-2 Parameter Comparison
A
A064 Jump frequency width 1 AG102
Addition of individual settings for sec-
ond control
A065 Jump frequency 2 AG103
Addition of individual settings for sec-
ond control
A066 Jump frequency width 2 AG104
Addition of individual settings for sec-
ond control
A067 Jump frequency 3 AG105
Addition of individual settings for sec-
ond control
A068 Jump frequency width 3 AG106
Addition of individual settings for sec-
ond control
A069 Acceleration stop frequency AG110
Addition of individual settings for sec-
ond control
A070 Acceleration stop time AG111
Addition of individual settings for sec-
ond control
A071 PID selection AH-01
A072 PID P gain AH-61
A073 PID I gain AH-62
A074 PID D gain AH-63
A075 PID scale Configured with AH-04 - AH-06
A076 PID feedback selection AH-51
A077 PID deviation reverse output AH-02
A078 PID changeable range AH-71
A079 PID feed forward selection AH-70
A081 AVR selection bA146
Second control extension
* 00→00, 01→01, 02→02
The same values are used for equiva-
lent operations.
A082 Motor incoming voltage selection Hb106/Hd106
Configured with Hb106 (IM)/Hd106
(SM/PMM).
A085 Operation mode selection Hb145
Addition of individual settings for sec-
ond control
A086
Energy-saving response/accuracy adjust-
ment
Hb146
Addition of individual settings for sec-
ond control
A092 First acceleration time 2 AC124
A292 Second acceleration time 2 AC224
A392 Second acceleration time 3 Abolition of third control
A093 First deceleration time 2 AC126
A293 Second deceleration time 2 AC226
A393 Second deceleration time 3 Abolition of third control
A094
First 2-step acceleration/deceleration selec-
tion
AC115
A294
Second 2-step acceleration/deceleration
selection
AC215
A095 First 2-stage acceleration frequency AC116
A295 Second 2-stage acceleration frequency AC216
A096 First 2-stage deceleration frequency AC117
A296 Second 2-stage deceleration frequency AC217
A097 Acceleration pattern selection AC-03
A098 Deceleration pattern selection AC-04
A101 OI start Cb-13 For Ai2
A102 OI end Cb-14 For Ai2
A103 OI start ratio Cb-15 For Ai2
A104 OI end ratio Cb-16 For Ai2
3G3RX-series V1 3G3RX2-series
Remarks
Display
code
Function name New code