Oracle ZFS Storage Appliance

Renaming a Storage Pool (CLI)
Note - If you have a single pool, the pool name is not displayed, but it is selected.
hostname:configuration storage (pool0)> set pool=pool1
pool = pool1
3.
Enter unconfig.
hostname:configuration storage (pool1)> unconfig
4.
Enter done.
5.
Enter import.
hostname:configuration storage> import
Search for storage. Begin the process of searching for existing storage pools.
Subcommands that are valid in this context:
help [topic] => Get context-sensitive help. If [topic] is specified,
it must be one of "builtins", "commands", "general",
"help" or "script".
show => Show information pertinent to the current context
abort => Abort this task (potentially resulting in a
misconfigured system)
done => Finish operating on "discover"
hostname:configuration storage> discover>
6.
Enter done.
7.
To select the storage pool you just unconfigured, enter set pool= and the pool
name.
hostname:configuration storage select> set pool=pool1
pool = pool1
8.
To rename the storage pool, enter set name= and a new name.
hostname:configuration storage (pool1)> set name=NewPool
pool = NewPool
9.
Enter done.
106 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016