Oracle ZFS Storage Appliance User Manual

Configuring Active Directory (CLI)
Windows Version Supported Software Versions Workarounds
2011.1.2 and later Must apply hotfix for KB951191, see
Section A.
Windows Server 2008 SP2 2009.Q2 4.0 - 2011.1.1 See Section C.
2011.1.2 and later None
Windows Server 2008 R2 2009.Q2 4.0 - 2011.1.1 See Section C.
2011.1.2 and later None
Active Directory Windows Server 2008 Support Section A: Kerberos issue (KB951191)
■
If you upgrade to 2009.Q2.4.0 or later and your Windows 2008 domain controller is running
Windows Server 2008 SP2 or R2, no action is required.
■
If you upgrade to 2009.Q2.4.0 or later and your Windows 2008 domain controller is running
Windows Server 2008 SP1, you must apply the hotfix described in KB951191 or install
Windows 2008 SP2.
Active Directory Windows Server 2008 Support Section B: NTLMv2 issue (KB957441)
■
The following applies only if your appliance is running a software version prior to 2011.1.2:
■
If your Domain Controller is running Windows Server 2008 SP1 you should also apply
the hotfix for http://support.microsoft.com/kb/957441/ (http://support.microsoft.com/
kb/957441/) which resolves an NTLMv2 issue that prevents the appliance from joining the
domain with its default LMCompatibilityLevel setting.
■
If the LMCompatibilityLevel on the Windows 2008 SP1 domain controller is set to 5, this
hot fix must be installed. After applying the hotfix you must create and set a new registry
key as described in KB957441.
■
If you upgrade to 2011.1.2 or later, you do not need the hotfix mentioned above.
Active Directory Windows Server 2008 Support Section C: Note on NTLMv2
■
The following applies only if your appliance is running a software version prior to 2011.1.2:
If your Domain Controller is running Windows Server 2008 SP2 or R2 you do not need to
apply the hotfix but you must apply the registry setting as described in KB957441.
■
If you upgrade to 2011.1.2 or later, no action is required.
Related Topics
■
“Joining an AD Domain (BUI)” on page 293
■
“Joining an AD Workgroup (BUI)” on page 294
■
“Configuring Active Directory (CLI)” on page 294
■
“Active Directory Join Domain” on page 296
■
“Active Directory Domains and Workgroups” on page 297
298 Oracle ZFS Storage Appliance Administration Guide, Release OS8.6.x • September 2016

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest