Oracle ZFS Storage Appliance User Manual

Network Configuration
icon description
Edit datalink/interface/route settings
Editing disabled
Destroy datalink/interface/route
Destruction disabled
Drag-and-drop icon
connected network port
connected network port with I/O activity
disconnected network port (link down, cable problem?)
active InfiniBand port
active InfiniBand port with I/O activity
inactive InfiniBand port (down, init, or arm state)
InfiniBand partition device is up
InfiniBand partition device is down (subnet manager
problem)
network datalink
network datalink VLAN or VNIC
network datalink aggregation
network datalink aggregation VLAN or VNIC
network datalink IB partition
interface is being used to send and receive packets (either
up or degraded)
interface has been disabled by the user
interface is offline (owned by the cluster peer)
interface has failed or has been configured with a
duplicate IP address
At top right is local navigation for Configuration, Addresses and Routing, which display
alternate configuration views.
Configuring the Appliance 57

Oracle ZFS Storage Appliance Specifications

General

Connectivity	10GbE, 40GbE, InfiniBand, Fibre Channel
Protocols	NFS, SMB, iSCSI, Fibre Channel, HTTP
Operating System	Oracle Solaris
Data Protection	snapshots, clones, remote replication
Data Reduction	Inline compression, deduplication
High Availability	Redundant hardware components (controllers, power supplies, fans). Automatic failover between controllers. Hot-swappable drives and components. Cluster configurations for increased availability and scalability.
Management Interface	Web-based GUI, CLI, REST API
Storage Type	Hybrid (SSD + HDD), All-Flash
Storage Capacity	Up to several petabytes
Encryption	AES-256 encryption at rest