R&S SMA100B - Page 602

Remote control commands
R&S
®
SMA100B
602User Manual 1178.3834.02 ─ 09
Parameters:
<Letter> float
Range: 50E-3 to 1
Increment: 1E-4
*RST: 300E-3
Example: See Example "Configure and generate a ADF signal"
on page 594.
Manual operation: See "Letter Space" on page 170
[:SOURce<hw>]:ADF:COMid:PERiod
<Period>
Sets the period of the COM/ID signal.
Parameters:
<Period> float
Range: 0 to 120
Increment: 1E-3
*RST: 9
Example: See Example "Configure and generate a ADF signal"
on page 594.
Manual operation: See "Period" on page 169
[:SOURce<hw>]:ADF:COMid:SYMBol <Symbol>
Sets the length of the Morse code symbol space.
Parameters:
<Symbol> float
Range: 50E-3 to 1
Increment: 1E-4
*RST: 100E-3
Example: See Example "Configure and generate a ADF signal"
on page 594.
Manual operation: See "Symbol Space" on page 169
[:SOURce<hw>]:ADF:COMid:TSCHema <TSCHema>
Sets the time schema of the Morse code for the COM/ID signal.
Parameters:
<TSCHema> STD | USER
*RST: STD
Example: See Example "Configure and generate a ADF signal"
on page 594.
Manual operation: See "Time Schema" on page 169
SOURce subsystem