R&S SMA100B - Page 727

Remote control commands
R&S
®
SMA100B
727User Manual 1178.3834.02 ─ 09
Parameters:
<Parity> NONE | ODD | EVEN
*RST: n.a. (factory preset: NONE)
Example: See Example "Finding out the used VISA resource strings"
on page 713.
Manual operation: See "Parity" on page 403
:SYSTem:COMMunicate:SERial:RESource?
Queries the visa resource string for the serial remote control interface. This string is
used for remote control of the instrument.
Return values:
<Resource> string
Example: See Example "Finding out the used VISA resource strings"
on page 713.
Usage: Query only
Manual operation: See "SERIAL" on page 401
:SYSTem:COMMunicate:SERial:SBITs <SBits>
Defines the number of stop bits for the serial remote control interface.
Parameters:
<SBits> 1 | 2
*RST: n.a. (factory preset: 1)
Example: See Example "Finding out the used VISA resource strings"
on page 713.
Manual operation: See "Stop Bits" on page 403
:SYSTem:COMMunicate:SOCKet:RESource?
Queries the visa resource string for remote control via LAN interface, using TCP/IP
socket protocol.
Return values:
<Resource> string
Example: See Example "Finding out the used VISA resource strings"
on page 713.
Usage: Query only
Manual operation: See "Socket" on page 401
SYSTem subsystem