R&S SMA100B - Page 728

Remote control commands
R&S
®
SMA100B
728User Manual 1178.3834.02 ─ 09
:SYSTem:COMMunicate:USB:RESource?
Queries the visa resource string for remote control via the USB interface.
Return values:
<Resource> string
Example: See Example "Finding out the used VISA resource strings"
on page 713.
Usage: Query only
Manual operation: See "USB" on page 401
:SYSTem:HELP:EXPort
Saves the online help as zip archive in the user directory.
Example:
:SYSTem:HELP:EXPort
MMEM:CDIR?
// "/var/user"
MMEM:CAT?
// ..,"Log,DIR,4096","help.tgz,BIN,69836600"
// confirms that help zip archive is saved.
Usage: Event
Manual operation:: "Setup > Help > Export Help to User Path"
:SYSTem:IDENtification <Identification>
Selects the mode to determine the "IDN String" and the "OPT String" for the instru-
ment, selected with command :SYSTem:LANGuage.
Note: While working in an emulation mode, the R&S SMA100B specific command set
is disabled, that is, the SCPI command SYST:IDEN is discarded.
Parameters:
<Identification> AUTO | USER
AUTO
Automatically determines the strings.
USER
User-defined strings can be selected.
*RST: n.a. (factory preset: AUTO)
Example:
SYST:IDEN AUTO
Automatically assigns the OPT and IDN strings according to the
selected instrument language.
Manual operation: See "Mode" on page 404
SYSTem subsystem