R&S SMA100B - Page 401

Network operation and remote control
R&S
®
SMA100B
401User Manual 1178.3834.02 ─ 09
Settings:
HISLIP.........................................................................................................................401
VXI11...........................................................................................................................401
Socket......................................................................................................................... 401
GPIB............................................................................................................................401
USB.............................................................................................................................401
SERIAL....................................................................................................................... 401
HISLIP
Displays the visa resource string for remote control with HiSLIP protocol.
See also Chapter 13.2.1, "LAN interface", on page 381
Remote command:
:SYSTem:COMMunicate:HISLip:RESource? on page 723
VXI11
Displays the visa resource string for remote control over LAN.
See also Chapter 13.2.1, "LAN interface", on page 381
Remote command:
:SYSTem:COMMunicate:NETWork:RESource? on page 724
Socket
Displays the visa resource string for remote control over LAN, using the socket com-
munication protocol.
See also Chapter 13.2.1, "LAN interface", on page 381
Remote command:
:SYSTem:COMMunicate:SOCKet:RESource? on page 727
GPIB
Displays the visa resource string for remote control over the GPIB interface.
See also Chapter 13.2.3, "GPIB interface (IEC/IEEE bus interface)", on page 384.
Remote command:
:SYSTem:COMMunicate:HISLip:RESource? on page 723
USB
Displays the visa resource string for remote control over the USB interface.
See also Chapter 13.2.2, "USB interface", on page 383
Remote command:
:SYSTem:COMMunicate:USB:RESource? on page 728
SERIAL
Displays the visa resource string for remote control over the serial interface.
See also Chapter 13.2.2, "USB interface", on page 383
Remote command:
:SYSTem:COMMunicate:SERial:RESource? on page 727
Remote access settings