R&S SMA100B - Page 724

Remote control commands
R&S
®
SMA100B
724User Manual 1178.3834.02 ─ 09
Manual operation: See "IP Address" on page 399
:SYSTem:COMMunicate:NETWork:IPADdress:MODE <Mode>
Selects manual or automatic setting of the IP address.
Parameters:
<Mode> AUTO | STATic
*RST: n.a. (factory preset: AUTO)
Example: See Example "Retrieving information on network-related set-
tings" on page 713.
Manual operation: See "Address Mode" on page 398
:SYSTem:COMMunicate:NETWork:MACaddress <MacAddress>
Queries the MAC address of the network adapter.
This is a password-protected function. Unlock the protection level 1 to access it.
Parameters:
<MacAddress> string
Example: See Example "Retrieving information on network-related set-
tings" on page 713.
Manual operation: See "MAC Address" on page 400
:SYSTem:COMMunicate:NETWork:RESource?
Queries the visa resource string for Ethernet instruments.
Return values:
<Resource> string
Example: See Example "Finding out the used VISA resource strings"
on page 713.
Usage: Query only
Manual operation: See "VXI11" on page 401
:SYSTem:COMMunicate:NETWork:RESTart
Restarts the network.
Example:
See Example "Restart network" on page 713.
Usage: Event
Manual operation: See "Restart Network" on page 398
SYSTem subsystem