Rohde & Schwarz R&S FSL3 - Page 1058

R&S FSL SENSe Subsystem (Analog Demodulation, K7)
1300.2519.12 6.299 E-11
SENSe:ADEMod Subsystem (Analog Demodulation, K7)
The SENSe:ADEMod Subsystem contains commands to set up the instrument for the measurement of
analog demodulated signals and query the result at the end of the measurement.
Commands of the SENSe:ADEMod Subsystem
– [SENSe:]ADEMod[:STATe]
– [SENSe:]ADEMod:AF:CENTer
– [SENSe:]ADEMod:AF:COUPling
– [SENSe:]ADEMod:AF:SPAN
– [SENSe:]ADEMod:AF:SPAN:FULL
– [SENSe:]ADEMod:AF:STARt
– [SENSe:]ADEMod:AF:STOP
– [SENSe:]ADEMod:AM[:ABSolute][:TDOMain][:TYPE]
– [SENSe:]ADEMod:AM[:ABSolute][:TDOMain]:RESult?
– [SENSe:]ADEMod:AM:RELative[:TDOMain][:TYPE]
– [SENSe:]ADEMod:AM:RELative[:TDOMain]:RESult?
– [SENSe:]ADEMod:AM:RELative:AFSPectrum[:TYPE]
– [SENSe:]ADEMod:AM:RELative:AFSPectrum:RESult?
– [SENSe:]ADEMod:BANDwidth|BWIDth:DEModulation
– [SENSe:]ADEMod:FM[:TDOMain][:TYPE]
– [SENSe:]ADEMod:FM[:TDOMain]:RESult?
– [SENSe:]ADEMod:FM:AFSPectrum[:TYPE]
– [SENSe:]ADEMod:FM:AFSPectrum:RESult?
– [SENSe:]ADEMod:FM:OFFSet?
– [SENSe:]ADEMod:MTIMe
– [SENSe:]ADEMod:PM[:TDOMain][:TYPE]
– [SENSe:]ADEMod:PM[:TDOMain]:RESult?
– [SENSe:]ADEMod:PM:AFSPectrum[:TYPE]
– [SENSe:]ADEMod:PM:AFSPectrum:RESult?
– [SENSe:]ADEMod:PM:RPOint[:X]
– [SENSe:]ADEMod:RLENgth?
– [SENSe:]ADEMod:SET
– [SENSe:]ADEMod:SPECtrum[:TYPE]
– [SENSe:]ADEMod:SPECtrum:BANDwidth|BWIDth[:RESolution]
– [SENSe:]ADEMod:SPECtrum:RESult?
– [SENSe:]ADEMod:SPECtrum:SPAN[:MAXimum]
– [SENSe:]ADEMod:SPECtrum:SPAN:ZOOM
– [SENSe:]ADEMod:SRATe?
– [SENSe:]ADEMod:ZOOM[:STATe]