Santana PS-10 User Manual

REAR DRIVE SHAFT 4B-11
• Finally remove strangling Girling clamp (A) from back sleeve
(1), purge rear brake circuit (see 5-17) and try brakes on
road (see 5-9).
Tightening torques:
• Screws/nuts fixing flange and brake caliper support
flange: 3.5 ÷ 4.25 Kg-m (35 ÷ 42.5 Nm)
• Nuts fixing lower part of shock absorber:
4 ÷ 6 Kg-m (40 ÷ 60 N m)
• Screws fixing brake caliper support:
6.5 ÷ 7.5 Kg-m (65 ÷ 75 Nm)
• Screws fixing driving flange:
3.5 ÷ 4.25 Kg-m (35 ÷ 42.5 Nm)
• Nuts fixing wheel: 11 ÷17 Kg-m (110÷170Nm)
1
A

Santana PS-10 Specifications

General

Brand	Santana
Model	PS-10
Category	Automobile
Language	English