5-28 BRAKES
Assembly
9) Lubricate cylinders, pistons and oil-seals with new brake
fluid.
10) Install the oil-seals in the cylinders, is such a way they are
perfectly fitted in the channellings.
11) Place dust covers on the pistons, ensuring they stay
positioned correctly, as shown in the figure.
12) Install piston with their corresponding cylinders and fix the
dust cover clip in the cylinder internal channelling.
13) Introduce thoroughly pistons and ensuring that the dust cover
clip is lodged in the piston channelling.
Installation
14) Reverse removal procedures, noting the specified tightening
torques in the complementary tasks.
To Next Page
Loading...
Need help?
General