Santana PS-10 User Manual

BRAKES 5-27
Revision
5) Verify dust covers in case there are any breakages, cracks
or damages, and replace them if necessary.
6) Verify oil-seals in case they show deformations, wear,
decomposition, etc...
NOTE:
Excessive wear on pads could be caused by a faulty
return of a piston. In such a case, change oil-seals.
7) Verify worthiness of cylinders and pistons in case they show
wears, scratches, corrosion, etc... Substitute them if
necessary.
8) Ensure that the purge hose is not blocked.
NOTE:
To wash metallic parts, use a solution of hot water and
neutral detergent.
Cilindro RETEN Cilindro RETEN
Pistón
Pistón
AB
Cilindro sin presión Cilindro con presión

Santana PS-10 Specifications

General

Brand	Santana
Model	PS-10
Category	Automobile
Language	English