Santana PS-10 User Manual

ENGINE REPAIR 6A-69
REPLACEMENT OF THE OIL FILTER
Dismantling
1) Dismantle oil filter (1) with key (A) ref. 790972.
2) Clean carefully contact area of oil filter on support (2).
Assembly
CAUTION:
Assemble always original filters . Remember it is a
double filtering effect special device.
1) Lubrify with engine oil oil-seals (3) and ensure that they are
perfectly tight in the lodgings of filter .
2) Screw filter by hand till being sure oil-seals (3) contact
with closing surface in support.
3) Using key (A) ref. 790972, apply to filter specified tightening
torque.
Tightening torque for the oil filter:
2,5 Kg-m (25 Nm)
2
1
A
3
NOTA:
Para el cambio de aceite del motor y nivel, (refiérase
a 0B-5).

Santana PS-10 Specifications

General

Brand	Santana
Model	PS-10
Category	Automobile
Language	English