MAINTENANCE AND LUBRICATION 0B-29
Visual control (Item 4.11)
Inspection
1) Verify the worthiness of the dust protector of the ball and
socket joints in case they show breakings, cracks,
deformations or misplacing.
2) Check the correct path and holding of the rigid tubings of
brakes and steering.
3) Verify the worthiness of the braking and steering sleeves
checking for rubbings, cracks or breakings.
4) Check there are no rubbings, interferences, collisions, etc...
between fix and mobile parts of brakes, steering and
suspension.
5) Inspect the linkages and sleeves and tubings junction, in
case there are liquid or oil leaks.
NOTE:
If there are leaks or faulty pieces, correct, substitute or
repair.
To Next Page
Loading...
Need help?
General