6C-6 ENGINE FUEL AND EMISSION CONTROL SYSTEM
TYPE
EMISSION VALUE
Exhaust gases
Conform to the Euro2 normative on gas
emissions (bench measure engine cycle
R49)Limits fixed by normative CEE 91/542
- CO (Carbon monoxide) < 4,0 g/KWh
- NO (Nitrogen monoxide) < 7,0 g/KWh
- HC (non combusted hydrocarbons) < 1,10 g/KWh
- Gas emissions:
Without catalyser With catalyser
< 0,15 g/KWh < 0,15 g/KWh
- Test fuel:
CEC RFT 73-T-90-S 0,05 %
£
Fumes
Conform to normative on exhaust fumes limit.
Limits fixed by normative CEE 72/306 and R
24-03
- Maximum power (Bosch BSU opacimeter degrees):
2,0 1,5
- Maximum torque (Bosch BSU opacimeter degrees):
2,5 2,5
- Full load at 1000 rpm (Bosch BSU opacimeter degrees):
3,5 3,5
Acoustic emissions
Mean maximum acoustic level Lpa of standard
configuration engines. Measured according to
ISO std.3474 (microphones placed 1m from
engine surfaces).
Minimun (800 r.pm.)
dB A 79 dB A 76
Maximun power (3800 r.p.m.)
dB A 99 dB A 96
MECHANICAL
INJECTION
8140.43C
COMMON RAIL
8140.43SID/TCA
ENGINE EMISSIONS
MECHANICAL INJECTION ENGINE COMMON RAIL ENGINE
To Next Page
Loading...
Need help?
General