Shimadzu GC-2010 Plus - Page 178

13 Detector
13.2 Hydrogen flame ionization detector (FID)
158
GC-2010 Plus
13.2.3.4 Flow rate program for detector gas
Press [Program] (PF menu) from [Det Gas] (PF menu) to display the Detector gas
screen shown in Fig. 13.2.4. Here, set a flow rate program for detector gas.
The flow rate program procedure is the same for the makeup gas, hydrogen gas and air.
For the flow rate program setting procedure, refer to “12.5.6 Creating a Flow rate
program”.
Fig. 13.2.4 Detector gas program
A 7 ramp program can be set.
Set the program for hydro-
gen and air the same way.
Press the appropriate PF
menu to set the programs.