16 Special Functions
16.9 Key Lock and Parameter Lock
270
GC-2010 Plus
Q Setting a password
Select [Password] (PF menu) from the screen shown in Fig. 16.9.4 to display the password
screen shown in Fig. 16.9.5. The password is a number ranging from 1 to 9999. The factory
set password is “2010”.
＜ Setting a password ＞
Enter each requierd password, and press [Set] (PF menu).
Enter the new password twice to confirm it.
NOTE If the “Old Password” or “Confirm new password” is incorrect, an error message appears.
Confirm the password to be input, entering it correctly.
NOTE Only the system supervisor should have password access. Change the factory-set password promptly.
Do not forget your password, and keep it secure.
Fig. 16.9.5 Password setup screen
To Next Page
Loading...
