Shimadzu GC-2010 Plus - Page 291

16 Special Functions
16.9 Key Lock and Parameter Lock
271
GC-2010 Plus
Q Unlocking the parameters (without password)
If parameters are locked and no password is required, when you select “9. LOCK” from the
[FUNC] key screen, the screen shown in Fig. 16.9.6 appears.
When the parameter are unlocked, the screen shown in Fig. 16.9.4 appears.
Q Unlocking parameters (with password)
If parameters are locked and a password is set, when you select “9. LOCK” from the
[FUNC] key screen, the screen shown in Fig. 16.9.7 appears.
When you input the correct password and press the [Unlock] (PF menu) key, the parameters
are unlocked and the screen shown in Fig. 16.9.4 appears.
Fig. 16.9.6 Parameter unlock screen (without password)
Fig. 16.9.7 Parameter unlock screen (when a password is set)
This screen is displayed
when parameters are locked.
This screen is displayed
when parameters are locked.