Shimadzu GC-2010 Plus - Page 294

17 Printing
17.1 Printing
274
GC-2010 Plus
17.1.2.2 AOC parameters
The current file’s AOC parameters and the parameters of AOC settings can be printed.
The AOC2 parameters can be printed when an AOC2 is configured in the analytical line.
All printed items are listed by command name. To match command names to screen
items, refer to “17.2 AOC commands”.
Fig. 17.1.2
17.1.2.3 Main parameters
Press [Print] (PF menu) from the [SET] key to print the temperature valves for all heated
zones, the CAR1/2 pressure value, and the total flow rate value from the current file.
Fig. 17.1.3
- AOC PARAMETER -
AOC1 AOC2
WRPT 2 2
WMOD 1 1
REPT 1 1
IVOL 1.0 1.0
WPRS 0 0
PUMP 5 5
WTPP 0.2 0.2
WAIT 0.0 0.0
ISPD 2 2
SSPD 1 1
SAND 0 0
SOLV 0 0
SINT 0 0
SSNO 0 0
SNO2 0 0
AAIR 0 0
USPD 2 2
DSPD 2 2
HIGH 0 0
LOWS 0 0
- GC PARAMETER 0:FILE0 -
COLUMN OVEN TEMP 25.0
INJ1 TEMP 25.0
DET1 TEMP 25.0
INJ1 PRESS 100.0
INJ1 FLOW 50.0
- END -