Shimadzu GC-2010 Plus User Manual

17 Printing
17.1 Printing
275
GC-2010 Plus
17.1.2.4 Time program and Pre-Run program
The time programs and Pre-Run programs can be printed as Event No. or parameter
names. To match Event No. and parameter names to screen items, refer to “17.3
Program Parameters” and “17.4 Event No.”
NOTE For all functions treated as events in the printout, the line No. is displayed as “0” regardless of the line
number.
Fig. 17.1.4
17.1.2.5 Batch schedule
Press [Print] (PF menu) to print the bach schedule as shown below.
Fig. 17.1.5
- GC TIME PROGRAM -
TIME FUNC VALUE LINE
0.0 EVNT 91.0 0
2.0 D1RG 1.0 1
3.0 D1RG 0.0 1
200.0 STOP 1990.0 0
- END -
- GC SAMPLE SCHEDULER -
START FINAL GC-FILE DP-FILE #INJ MK COMNAD
1 5 0 Ch.1-2 1 STANDARD STEST
6 15 0 Ch.1-2 3 UNKNOWN
- END -

Shimadzu GC-2010 Plus Specifications

General

Type	Gas Chromatograph
Model	GC-2010 Plus
Manufacturer	Shimadzu
Maximum Temperature Ramp Rate	120 °C/min
Detector Options	FID, TCD, ECD, FPD, NPD, MS
Electronic Flow Control (EFC)	Yes
Data Sampling Rate	Up to 250 Hz
Column Oven Temperature Range	Ambient +5°C to 450°C
Maximum Oven Heating Rate	120 °C/min
Injection Port	Split/Splitless, PTV
Display	LCD