. . . . .
CONVEYOR ENHANCEMENTS
Software Configuration
2-9317-600-00-0 Aquastorm™ Series Options Guide 6-91
Configuration
Procedure
Configure the conveyor as follows
1. Press the menu key on the LCD interface keypad to access configuration
screen #1.
2. Press the page down key twice to display configuration screen #3.
3. Press the enter key to display the conveyor pitch required for operation.
4. Press the enter key to accept the configuration.
5. Press the Menu key to accept the changes.
6. Result: The update screen displays and the system returns to the main menu.
7. Begin system operation. For detailed information refer to the Aquastorm 200™
or Aquastorm 100™ Programming and Operation Manual.
To Next Page
Loading...