BAG FILTERS
Water Filtering
13-240 Aquastorm™ Series Options Guide Rev. 1
13
Section C:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation
Water Filtering
Introduction Wash section bag filter cylinders mount in the rear pre-wash section of any
Aquastorm™ machine. Rinse section bag filter cylinders mount in the rear rinse
section of the Aquastorm 200™ system only.
Operation Water exits the wash or rinse tank, flows through the water pump to the top of
the bag filter cylinder. In the cylinder it passes through the felt filter and mesh
basket. Water exits the filter cylinder from the bottom into the plumbing tree
where it is fed to the wash or rinse nozzles and sprayed on the product. This
cycle repeats until such time as the tanks are drained for maintenance.
To Next Page
Loading...