BAG FILTERS
Maintenance Schedule
13-242 Aquastorm™ Series Options Guide Rev. 1
13
Maintenance Schedule
Introduction A strong preventive maintenance program is the best method to cut costs,
increase system reliability, and enhance productivity. The time used for cleaning,
inspecting, and servicing ensures consistent production quality and increases the
extended service life of the machine.
Safety To ensure personal safety and avoid equipment damage observe the following:
CAUTION
Qualified maintenance staff should perform the following cleaning steps. If any
damage to the plumbing, filter housing, or connections is noted, contact
Electrovert Customer Service.
Maintenance Schedule Refer to the following maintenance schedule to ensure proper machine and option
operation.
Daily Maintenance — Every eight (8) hours of Operation
Cleaning Procedure Reference
Whenever water tank is emptied, inspect bag
filter. Replace if necessary.
Check O-ring seal under cylinder lid for cuts,
cracks, or breaks. Replace if necessary.
Whenever water tank is emptied, check mesh
basket. Clean if necessary.
To Next Page
Loading...