. . . . .
SAFETY INFORMATION
Hot Surface Hazards
2-9317-600-00-0 Aquastorm™ Series Options Guide -3
Hot Surface Hazards
Introduction During normal operation this equipment and some of its components operate at
temperatures up to 60–71 °C (140–160 °F). The operator must use extreme
caution and wear the recommended safety garments prior to coming in contact
with hot surfaces or components. Closely follow and adhere to the warnings in
this document which pertain to hot surfaces.
Safety To ensure personal safety and avoid equipment damage, observe the following:
Hot Surface
Operating this equipment may introduce burn hazards. Avoid contact with all hot
surfaces, hot water, and steam. The viewing glass can reach temperatures in
excess of 71 °C (160 °F). Take extreme caution to avoid touching the glass
surfaces. Water temperatures reach and/or exceed 71 °C (160 °F). Steam may
escape from the system cabinet when windows are opened during operation or
for maintenance, installation, upgrade, or repair procedures. Steam causes
serious burns. Avoid contact with steam.
Hot Surface
Use extreme caution when working around or with hot components. Allow hot
components to cool before handling whenever possible.
Photograph The following Photograph shows the hot surface warning tag.
Figure 1–1
To Next Page
Loading...