. . . . .
OPTIONS AND TECHNICAL DATA
SCAT Package
2-9317-600-00-0 Aquastorm™ Series Options Guide 2-41
SCAT Package
Introduction The Side Connector Airknife Technology (SCAT) option package mounts only in
dryer module #1 or add-on dryer module #3. The SCAT adjusts in two (2)
directions and offers additional drying to the sides of a PCB (Printed Circuit Board)
as it moves along the conveyor.
Photographs Figure 2–18 shows front and rear SCAT units installed in a dryer unit:
Figure 2–18
To Next Page
Loading...