. . . . .
DRYER MODIFICATIONS
Overview
2-9317-600-00-0 Aquastorm™ Series Options Guide 15-289
Section C:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IR Heater
Overview
Introduction This section describes the Infrared (IR) heater option used to the enhance printed
circuit board assembly drying process.
In this section Refer to the following information
Topic See Page
Functional Description 15 – 290
Safety 15 – 291
Software Configuration 15 – 292
Check IR Heater Temperature 15 – 295
Preventive Maintenance 15 – 296
Repair 15 – 298
Recommended Spares 15 – 300
To Next Page
Loading...